San Angelo Water Restoration Pros provides professional mold inspection & moisture testing in San Angelo, TX for residential and commercial properties across the Concho Valley. Air sampling sells beautifully and answers very little. In a climate this dry, an indoor spore count mostly tells you what blew in off the pasture and through the front door while the technician was setting up.
What actually finds the problem is water. We map moisture across the suspect area with a pinless meter, confirm with pins where the reading matters, scan for the temperature differential a wet cavity produces, and put a borescope through a hole the size of a dime to look at the framing rather than guess at it.
There are cases where sampling is the right call and we will say so plainly. Post-remediation verification, an occupant with symptoms and no visible source, a dispute between a buyer and a seller, or anything heading toward litigation. Then you want numbers from a lab, taken by someone with nothing to gain from the result.
That last point is the one Texas takes seriously. The state licenses mold assessment separately from mold remediation through the Department of Licensing and Regulation, and above twenty-five contiguous square feet the same company generally should not both assess and remediate the job. When that line is in play, we tell you to hire an independent assessor.
A report worth paying for shows the readings, the locations, the dry standard taken from unaffected material, photographs of what the borescope saw and a plain statement of where the water came from. Anything that opens with a spore chart and closes without a plumbing conclusion is a sales document wearing a lab coat.
Our bias is simple, and you are welcome to hold us to it. We would rather spend your money on two hours of investigation that finds the failed fitting than on a lab panel that confirms what everyone already knows, which is that a house in West Texas has dust in it.
With 15+ years of experience, our licensed and insured team brings the right materials and equipment to every job — ANSI/IICRC S500 water damage restoration standard, grains-per-pound psychrometric readings, low-grain refrigerant dehumidifiers, pinless and penetrating moisture meters, thermal imaging moisture detection, weighted extraction tools — and backs the work with a written workmanship warranty. We serve San Angelo and nearby communities including Grape Creek, Christoval, Mertzon, Ballinger.
What We Handle
Everything our mold inspection & moisture testing in San Angelo covers
One crew, one point of contact, and the full range of mold inspection & moisture testing work in San Angelo, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- mold inspection San Angelo
- moisture testing home
- thermal imaging leak detection
- borescope wall inspection
- air sampling mold test
- post remediation verification testing
- hidden leak detection
- mold assessment Texas
- real estate mold inspection
- humidity monitoring
- surface sampling mold
- moisture map report
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our San Angelo services.
Materials, equipment and how we do mold inspection & moisture testing
The difference between mold inspection & moisture testing that lasts and mold inspection & moisture testing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with ANSI/IICRC S500 water damage restoration standard, grains-per-pound psychrometric readings, low-grain refrigerant dehumidifiers, pinless and penetrating moisture meters, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every San Angelo job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of water damage work in the Concho Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do mold inspection & moisture testing outside San Angelo
San Angelo Water Restoration Pros covers San Angelo and the surrounding communities of the Concho Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Mold Inspection & Moisture Testing in Grape Creek, TX — Tom Green County, population 3,594 at the 2020 census
- Mold Inspection & Moisture Testing in Christoval, TX — Tom Green County, population 482 at the 2020 census
- Mold Inspection & Moisture Testing in Mertzon, TX — Irion County (county seat), population 747 at the 2020 census
- Mold Inspection & Moisture Testing in Ballinger, TX — Runnels County (county seat), population 3,619 at the 2020 census
- Mold Inspection & Moisture Testing in Winters, TX — Runnels County, population 2,345 at the 2020 census
- Mold Inspection & Moisture Testing in Miles, TX — Runnels County, population 875 at the 2020 census
Start on the San Angelo Water Restoration Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why San Angelo Chooses San Angelo Water Restoration Pros
- ✓Equipment chosen from psychrometric readings, not from a rental schedule
- ✓Daily moisture logs and a documented dry standard on every job
- ✓Failed supply hardware bagged and kept for your adjuster
- ✓We say when a smaller scope is the right one, in writing
The standards behind mold inspection & moisture testing
Quality here is not a matter of opinion — it is written down. The mold inspection & moisture testing work we do in San Angelo follows published industry standards: IICRC publishes the S500 water-damage restoration standard, and EPA mold cleanup guidance sets the remediation thresholds and containment practice. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every mold inspection & moisture testing project in San Angelo gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free mold inspection & moisture testing free estimate in San Angelo, or request a quote and we'll get right back to you.